The Aquario NEO Special Type Curved acrylic CO2 diffusor is an acrylic CO2 Diffusor with a very narrow diffusor body and the connection to the pipe at its side. The special ceramic membrane produces a fine mist and the CO2 gets dissolved very quickly. The special small design ensures a fine integration of the diffusor into small and nano tanks.

• Diameter: 12 mm
• Length : 23 cm
• Max glass thickness : 9 mm
  
  

  For finest bubbles it is advisable to put the diffusor into water for 30 minutes, so that all membrane pores get soked completely. If the bubbles get bigger with time, you can clean the membrane with bleach.
  When algae start forming on your glassware equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Glassware is easy to clean, however, it should be done diligently. After the cleaning process, your glassware products will be as good as new.

  - You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
  - Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the glassware products you wish to clean are entirely covered
  - Soak the glassware in the solution for 1 to 4 hours (depending on the severity of the stains)
  - Take it out and rinse thoroughly
  - Now all the stains ought to be gone, and your glassware should shine as if new

  Sizes:
  Tiny: diameter: 8 mm, ~50 liter tank
  Small: diameter: 12 mm, ~100 liter tank
  Medium: diameter: 17 mm, ~100-200 liter tank
  Large: diameter: 24 mm, 200~ liter tank